4,500L Concrete Septic Tank

A locally manufactured 4,500 litre concrete septic tank for residential wastewater systems, available in single chamber, double chamber and pump chamber configurations. Includes a T1800 outlet Bio Filter.

4,500L CAPACITY
3 CONFIGURATIONS AVAILABLE
T1800 BIO FILTER INCLUDED
150MM MAXIMUM SOIL COVER

A Septic tank made to last

A locally manufactured 4,500 litre concrete septic tank for residential wastewater systems, available in single chamber, double chamber and pump chamber configurations. Includes a T1800 outlet Bio Filter.

Precision Drainage (3)
CONFIGURATIONS & OPTIONS

Choose the configuration to suit your section

The 4,500L septic tank is available in three chamber configurations to suit different wastewater systems.

Configuration Description
Single Chamber Standard single-chamber configuration for straightforward septic applications.
Double Chamber Incorporates an internal dividing wall to provide an additional settling stage.
Double Chamber with Pump Chamber Includes a separate pump chamber for systems where pumped discharge is required.

Standard configuration

Supplied with a T1800 outlet Bio Filter and a standard non-trafficable precast concrete lid, suitable for up to 150 mm of soil cover.

Custom options

  • Trafficable lid options
  • Anti-flotation feet

Speak to Wade about the requirements for your site and wastewater system.

product photos

TECHNICAL DETAILS

Specifications

Additional information

Nominal capacity

4,500 litres

Length

2,440 mm

Width

1,700 mm

Tank height

1,850 mm

Approximate total height with lid

2,000 mm

Inlet height

1,650 mm

Outlet height

1,550 mm

Approximate total weight

3.25 tonnes

Standard lid

Non-trafficable precast concrete

Maximum soil cover

150 mm above the lid

Outlet filter

T1800 Bio Filter included

Available configurations

Single chamber, double chamber, or double chamber with pump chamber

Wade Concrete Septic Tank Technical Drawings
IMPORTANT INFORMATION

Plan the installation around your wastewater system

Installation

The septic tank must be installed in accordance with the approved wastewater system design and relevant local authority requirements.

Install the tank level on a properly prepared, stable base, divert stormwater and surface water away from the tank and disposal field, and make sure the tank remains accessible for inspection, filter cleaning and pump-out.

Placement is handled by the customer’s suitably equipped contractor. Wade can recommend experienced local contractors where required.

Lid and loading

The standard tank is supplied with a non-trafficable concrete lid and can have up to 150 mm of soil cover above the lid.

Do not position the standard tank beneath driveways, vehicle accessways or areas subject to vehicle or other heavy loads. A bespoke trafficable lid can be supplied where required.

Routine maintenance

Have the tank emptied approximately every three years, or sooner if required, and inspect and clean the T1800 Bio Filter every six months.

Keep the access points clear and regularly check the disposal field for signs of wet or saturated ground.

 

Need pricing or advice on this product?

Talk to our team about suitability, delivery and pricing for your site.